🔥 Elevate your 3D prints with precision-dried filament every time!
The Creality Space PI Filament Dryer Plus is a professional-grade filament drying box designed to store and dry two 1KG spools simultaneously. Featuring a powerful 110W PTC heater with 360° hot air circulation, it ensures uniform and rapid drying to prevent moisture-related print defects. The 3.7-inch touchscreen offers one-key presets for 12 filament types and adjustable temperature (45℃~70℃) and timer (up to 48 hours) settings. Compatible with most 1.75mm and 2.85mm filaments, it also remembers your settings after power outages, making it an essential tool for millennial makers seeking flawless 3D printing results.
Manufacturer | Creality |
Brand | Creality |
Item Weight | 2.2 pounds |
Product Dimensions | 11.81 x 7.28 x 10.62 inches |
Item model number | Space PI Plus |
Color | Space Pi Filament Dryer Plus |
Material Type | Acrylonitrile Butadiene Styrene |
Size | Space PI Filament Dryer Plus |
Manufacturer Part Number | 3D-Dryer Box-Space PI Plus |
L**R
It works!
I absolutely love this white PLA! It's spectacular—smooth, clean, and adheres perfectly to the print bed. I used it with my Creality Ender 3 V3 KE to print a stormtrooper bonsai pot, and it turned out amazing. This PLA gave me the exact look I wanted and holds acrylic paint exceptionally well. While I usually order directly from Creality, Amazon's quick delivery ensured I got this roll right when I needed it. A fantastic choice after a disappointing experience with Soleyin PLA.
R**T
Best for Creality Printers
Great product for Creality printers. I use a ender 3 KE and this filament works very well with it. The color changes are great and it does not clog like the glow in the dark or clear filament.
N**Y
Great for beginners
Prints clean and smooth very easy to paint after prints are complete
T**E
Great filament dryer to keep your filament humidity below 20%
Works great as filament dryer. I attached it to my Bambu A1 with included hose and a 3d printed adaptor and bob is your uncle.This is a must have accessories for Texas humid summers
Z**.
Decent quality filament, but be aware that color transitions are very gradual
Since this listing is for a number of different filament colors, and also randomly a filament dryer, note that my review is based specifically on the rainbow filament.I haven’t had any issues with clogging, adhesion on a smooth PEI print sheet (for Prusa CORE One) is good, layer adhesion is also good, and I haven’t experienced any other problems.One thing to note is that there is a lot of filament length in between color transitions. If you’re printing something relatively small, it’s likely to be all one color, with maybe a little bit of a second color added in depending on where you are in the stool. Where this filament really shines is on large prints, where you actually do get a second or maybe third color.In my opinion, they should have a version like this (and label it accordingly: because this isn’t what I was expecting), and a version for smaller objects where the colors transition more closely together and the rainbow repeats throughout the spool. I’ve only used about 1/10 of it so far (it’s on yellow now), so I’m not sure how many rainbows you get in a spool, or if it just starts on violet and ends on red.In the picture, you’ll see the “Robo Alpaka” print from Prusa’s test models. I thought it looked pretty decent and the print quality wasn’t bad.
J**N
Filament works great.
Used the filament a few times now. Runs great through my Bambu Lab A1 COMBO. Works in my AMS.
W**E
Had trouble with the grey color.
First of all I want to point out that I use Creality Hyper PLA and I love it. I've run through dozens and dozens of spools and not had any trouble at all. I use a Sunlu filament dryer for all my filament while I'm printing, so it's dry. It maybe a one off, but the grey just doesn't have good layer adhesion at all. My slicing is all the same and I'm using the same parameters for the other colors, but after 3 days of not getting a good print, I gave up. I did some research and found many others having trouble with the grey. Again, I'm a big fan of the Hyper PLA, as the other colors give excellent results, but the grey just didn't work for me.
E**O
great drier, easy to use, improved the quality of my prints by a lot!
great drier, easy to use, improved the quality of my prints by a lot!
Trustpilot
2 weeks ago
1 week ago