J-Tech DigitalDigital Audio Extender Converter for Optical/Coaxial Audio Over Single Cat5e/6 Cable (PoC) up to 990’ (300m) for Dolby Digital, DTS 5.1, DTS-HD, PCM [JTECH-AET1000]
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

J-Tech DigitalDigital Audio Extender Converter for Optical/Coaxial Audio Over Single Cat5e/6 Cable (PoC) up to 990’ (300m) for Dolby Digital, DTS 5.1, DTS-HD, PCM [JTECH-AET1000]

4.2/5
Product ID: 75860742
Secure Transaction
12 interest-free installments with tabby

Details

  • Brand
    J-Tech Digital
  • Maximum Supply Voltage
    5 Volts
  • Mounting Type
    Coaxial
  • Number of Pins
    8
  • Upper Temperature Rating
    35 Degrees
🎶HD audio support
📏990’ range
🔊Simultaneous outputs

Description

🎧 Elevate Your Sound Game!

  • EFFORTLESS SETUP - Quick installation with PoC technology—only one power adapter needed!
  • DUAL DESTINATION DELIGHT - Simultaneously connect two audio outputs for a truly immersive experience.
  • LIFETIME SUPPORT ASSURANCE - Enjoy peace of mind with a 1-year warranty and free lifetime technical support.
  • UNLEASH YOUR AUDIO POTENTIAL - Extend your audio signals up to an impressive 990’ over a single Cat5e/6 cable.
  • HIGH DEFINITION AUDIO EXPERIENCE - Supports Dolby Digital, DTS 5.1, DTS-HD, and PCM for crystal-clear sound.

The J-Tech Digital Audio Extender Converter allows you to extend optical or coaxial audio signals up to 990 feet using a single Cat5e/6 cable. It supports multiple audio formats, offers simultaneous outputs, and features easy installation with minimal power requirements. Plus, it comes with a 1-year warranty and lifetime technical support.

Large manufacture image 1Large manufacture image 2Large manufacture image 3Large manufacture image 4

Have a Question? See What Others Asked

Can this work through multiple network switches? I want my sonos connect in network closet and optical run through my network to my fam room and basem
Do you have a model that combines hdmi and optical audio into a single transmitter and receiver unit?
What is the signal power loss at the optical output of the receiver compared to the signal power at the optical input at the transmitter?
What are the specs (amps, and mm dimensions of the barrel connector) on the power adapter?

Reviews

4.2

All from verified purchases

J**S

Worked great for me!

I encountered a situation during an installation where the distance between the TV and the media closet rendered the existing HDMI cable incompatible with a 4K device. To facilitate audio transmission between the two locations promptly, I utilized an available Ethernet connection. Initially, I had modest expectations for the performance of this device based on prior reviews. However, in my experience, I encountered no issues with sound quality, volume, or surround sound. Everything functioned flawlessly, which was very satisfying.

J**S

Works for sending audio back to a remote amp from a TV

When TV operate as a monitor for signals sent from an AV switcher or amplifier, the audio came out of the amp too. But nowadays, TV's are far more than just monitors: they're the epicenter of the streaming services- the source for the imagery AND the audio. Now the information is going out of the TV instead of into it. So how to you get the audio back to that nice remote 7.1 amp and in-wall speakers you installed 6 years ago? There is something called ARC (Audio Return Channel). This is supposed to output the audio signal through an HDMI cable to an amp. I bought converters to change the ARC signal to cat 5 and back again. (I only have cat5 in the walls) This did NOT work for me. And from what I understand, ARC tends to not work very well.These J-tech boxes do something similar, but they do it with the TV's optical audio signal output. It converts the optical signal to Cat5, then back to optical audio, then into the amp. The only issue is that you will have to provide power to the transmitter unit, which can be tricky in the spaces behind a wall mounted TV. No latency, sounds great, and fewer remotes on the coffee table. Highly recommended.

R**J

Simple setup

Works great for connecting the optical output from my TV to a remote media rack. Nothing to configure - just plug in optical cables, Ethernet cables, and the power supply. The power supply can only go on one side of the link, so make sure that is OK for your use case.

T**N

Jtech admits this product does not work, refuses to refund

Update: after five hours of troubleshooting, purchasing new cables at Jtech's direction, and two sets of these, Jtech finally admitted over email that this product CANNOT ESTABLISH OR MAINTAIN HDMI HANDSHAKES. That means IT DOES NOT WORK, they know it, and have no intention of making it work. They also refused to refund my purchase because it was outside a 30 day window. It was outside the window because I spent literally weeks troubleshooting it and shipping these back and forth to them. NEVER BUY A JTECH PRODUCT.This worked for about an hour in the initial test, then ARC audio never worked again for cable runs more than 3 feet. CEC control still works (turns on the receiver and controls volume setting), but no audio is transmitted. I tried three different ARC compatible receivers, two ARC TVs, three confirmed-good ARC-compatible HDMI cables. Triple checked all settings across all devices. If I use a CAT cable longer than 3 feet, I get no audio. $80 down the drain.

T**R

Shockingly good

My receiver is an older receiver that only has optical inputs. My tv is quite far away and has an optical out. Luckily, I had run network cable through the walls a long while back. I found this product and it allowed to go optical out from the tv into 1 end of this dive, then network cable. The other end, network cable into this device, optical out to the receiver. It works without any configuration, I don't see any delay in the audio. It just worked out of the box and saved me from buying another receiver.One point to note: the optical cable only transmits dolby digital if I'm not mistaken. If you want Dolby Atmos, you would have to use HDMI-ARC or eARC so this is not likely the right solution for that. Still most of the content I watch is dolby digital for now and so this is sufficient for a while.

G**T

Works with ADAT!!

Works exactly as described as well as working with 48khz 24 bit 8ch. ADAT.

J**D

Did the job!

Worked great, no issues!

J**G

They work, feel and look high quality, BUT NOT Bidirectional

These worked, but unlike the discription they are directional. There is 1 power supply, 1 transmitter and 1 receiver. They will not work if the source is plugged into the receiver. The the power plug is located on the transmitter module. Make sure this will be okay for your application.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
SAR 270

Duties & taxes incl.

KSAstore
1
Free Shipping

with PRO Membership

Delivery Partners: SMSA, iMile

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction
12 interest-free installments with tabby

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Imran F.

Very reliable shop with genuine products. Will definitely buy again!

2 weeks ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

J Tech Digitaldigital Audio Extender Converter For Optical Coaxial Audio | Desertcart KSA